-

Kakute H7 V2

Key Features

  • Integrated Bluetooth
  • HD camera plug
  • Dual plug-and-play 4in1 ESC ports
  • 9V VTX ON/OFF Pit Switch, barometer, OSD
  • 6x UARTs
  • 128MB Flash for Logging
  • 5V and 9V BEC
  • Bigger soldering pad with easy layout
Get A Quote

Package Details

Full Package Contents Kakute H7 v2 Flight Controller w/ Bluetooth*1
 M3 Anti-Vibration Silicone Grommet Insert *4
 JST SH 8pin 150mm cable*2 
 JST GHR 8pin to JST GHR 6pin 80mm cable*1 (for DJI/Caddx & other HD Systems)
 JST GHR 6pin 100mm cable*2 (for Caddx & other HD Systems)

Full Specifications Table

Specifications
  • MCU – STM32H743 32-bit processor running at 480 MHz
  • IMU – BMI270
  • Barometer – BMP280
  • OSD – AT7456E
  • Onboard Bluetooth chip – ESP32-C3
    • SpeedyBee IOS & Android App Compatible
    • Note: The Bluetooth onboard is set to automatically turn off when the flight controller is unlocked (arm)
      and turn on automatically when the flight controller is locked (disarm).
  • VTX ON/OFF Pit Switch – Switch can be enable using USER1 in Betaflight Mode tab.
    • Warning: Do not enable this pit switch if you are using DJI FPV Remote Controller
    • INAV VTX ON/OFF Pit Switch setup instruction
  • 6x UARTs (1,2,3,4,6,7; UART2 is used for Bluetooth telemetry)
  • 9x PWM Outputs (8 Motor Output, 1 LED)
  • Battery input voltage: 3S-8S
  • BEC 5V 2A
  • BEC 9V 3A
  • Mounting – 30.5 x 30.5mm/Φ4mm hole with Φ3mm Grommets
  • Dimension – 35x35mm
  • Weight – 8g
  • 2x JST-SH1.0_8pin port (4in1 ESCs, x8/Octocopter compatible)
  • 1x JST-GH1.5_6pin port (For HD System like Caddx Vista, Air Unit, or other VTX)