M10 GPS
Key Features
- Newest Ublox 10th Gen GNSS
- Fast & Accurate Positioning
- High-gain 25*25*4mm antenna
- IST8310 Compass
- Internal Buzzer, Safety switch
- Ultra Bright UI RGB LED
Package Details
- Standard Connector
- Secondary GPS Connector
- Connector For Pix32 & Pixhawk 1/2.4.6/2.4.8
| Standard Connector Set (This option is the most common) (JST GHR1.25mm 10pin cable): Used on the Pixhawk Standard Flight Controller 10pin “GPS Module” or “GPS1” input port | 1x M10 GPS Module 1x Fixed Carbon Fiber GPS mount |
| Secondary GPS Connector Set (JST GHR1.25mm 6pin cable): Used on Pixhawk Standard Flight Controller 6pin“UART & I2C”or “GPS2” input port as secondary GPS This GPS is also compatible with the Cube Flight Controller GPS2 Port | 1x M10 GPS Module 1x Fixed Carbon Fiber GPS mount |
| Connector for Pix32 & Pixhawk 1/2.4.6/2.4.8 Set (Molex 1.25mm 6pin & 4pin &3pin cable): These connectors are for “Switch”, “GPS”, and “I2C” input ports on the Pix32/Pixhawk1/Pixhawk 2.4.6/2.4.8 | 1x M10 GPS Module 1x Fixed Carbon Fiber GPS mount |
Full Specifications Table
| GNSS Receiver | Ublox M10 |
| Number of Concurrent GNSS | Up to 4 GNSS
|
| Frequency Band | GPS L1 Galileo E1 GLONASS L1 BeiDou B1 SBAS L1 QZSS L1 |
| Compass | IST8310 |
| Output Protocol | UBX (U-blox) NMEA |
| Accuracy | 2.0m CEP |
| Nav. Update Rate | Up to 25 Hz (single GNSS), Up to 10 Hz (4 concurrent GNSS) |
| GNSS Augmentation System | EGNOS, GAGAN, MSAS and WAAS QZSS: L1S |
| Default Baud Rate | 115200Hz |
| Input Voltage | 4.7-5.2V |
| Port Type | JST-GH-10P |
| Antenna | 25 x 25 x 4 mm ceramic patch antenna |
| Power consumption | Less than 200mA @ 5V |
| Operating Temperature | -40~80℃ |
| Dimension | φ50 x14.4 mm |
| Weight | 32g |
| Cable Length | 26cm |
| Other | Tri-color LED Onboard Buzzer Safety Switch LNA MAX2659ELT+ RF Amplifier Rechargeable Farah capacitance Low noise 3.3V regulator |